Part 21 Report - 1999-352
Some of the links on this page are to non-NRC servers and websites and are provided solely as a reference for the convenience of users. NRC cannot guarantee the authenticity of documents or the validity of information obtained at these non-NRC websites. See our Site Disclaimer for more information.
ACCESSION #: 9907290189
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of Americal
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 15, 1999
Mr. Bob Stransky
United States Nuclear Regulatory Commission
Event Assessment
1155 Rockville Heights
Rockville, MD 02852
SUBJECT: Our notification to you at 10:00 AM July 9, 1999
Dear Mr. Stransky,
In accordance with 10CFR21 this letter is to inform you that The Foxboro Company has today sent the enclosed letter to 48 locations identified as being customers for a potential defect with N-2A0-L2C-R or N-2A0-L2C-R with ECEP 10273, Contact Output Isolator cards that may contain specific N0152CK or C0147SS relays. Please note that our notification now has been extended to include customers potentially receiving relays manufactured from 1977 (previously 1981) through 1993. This was done to ensure the complete coverage of the issue based on further information from our vendor.
|
Sincerely, |
|
The Foxboro Company
George Robert Johnson
Director, Corporate Quality Assurance and Product Safety
|
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
REPRESENTATIVE SAMPLE
July 14, 1999
<<Title>> <<FirstName>> <<LastName>>
<<JobTitle>>
<<Company>>
<<Address1>>
<<Address2>>
<<City>>, <<State>> <<PostalCode>>
Reference: |
Your Purchase Order Number: <<PurchaseOrderNo>>
Foxboro Sales Order Number: <<SalesOrderNo>>
Quantity:<<Quantity>>
Model: N-2A0-L20-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
In some applications, The Foxboro Company also utilizes a 2 Form C version of this relay (Foxboro part number C0147SS). Both N0152CK & C0147SS relays utilize the same materials and construction techniques. Although no failures of the C0147SS relays from shunt paths have occurred, the potential for such a failure does exist in the same low voltage & low current applications. For this reason Foxboro is recommending that those Contact Output Isolators which utilize C0147SS relays be included in the following recommended corrective actions. Such corrective actions should be evaluated immediately and Implemented as soon as possible.
The Foxboro Company is recommending that each customer inspect for, and replace, N0152CK & C0147SS relays manufactured by Potter & Brumfield which display manufacturer's date codes between 7707 and 9352, with those replacement relays manufactured by Communications Instruments Inc. The date code is indicative of the year of manufacture first, followed by the calendar week of the indicated year.
Inspection for those relays supplied by Potter & Brumfield will require removal of the N-2A0-L2C-R card from the nest. Visual inspection of the relay package allows easy identification of those relays manufactured by Potter & Brumfield. The sides of the relay and are stamped with the Potter & Brumfield name, the Potter & Brumfield part number, the appropriate Foxboro part number (N0152CK or C0147SS), and the coil resistance. In some instances the side of the relay may display the manufacturer's date code, otherwise the relay has to be removed from the relay socket, after which the date code can be found on the base of the relay. If the relay has a manufacturer's date code marking beginning with 7707 through and including 9352, it should be removed and replaced with one manufactured by Communications Instrument Inc.
Relays stamped with "SIGMA" on the top, or Communications Instruments Inc on the side, do not require replacement.
Replacement N0152CK or C0147SS relays may be obtained by contacting the Foxboro Response Center at 1-888-Foxboro (1-888-369-2676). You may also feel free to contact the Foxboro Response Center if you have any questions regarding this notification.
The U.S. Nuclear Regulatory Commission has been informed of this potential defect. The Foxboro Company sincerely regrets any inconvenience this potential defect may cause you and trusts that our actions will completely resolve this matter to your satisfaction.
|
Best regards,
The Foxboro Company
George Robert Johnson
Director, Corporate Quality Assurance and Product Safety
|
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Design & Vendor Documents Mgr., TMI
GPU Nuclear Corporation
P.O. Box 485
Middletown, PA 17057
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:123
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
General Electric Company
1100 Western Avenue
Building 2-3
Lynn, MA 01910
Reference: |
Your Purchase Order Number: 089T376171 N-062 & 089T376175N032, A89-Q9-328283-G800
Foxboro Sales Order Number: 791349288, 84N36475
Quantity:5
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
General Electric Company
1285 Boston Avenue
Bridgeport, CT 06602
Reference: |
Your Purchase Order Number: 194BFO-74009, 194BFO-94034
Foxboro Sales Order Number: 771316583, 791328101
Quantity:4
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147S8 relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
General Electric Company
FSO Nuclear
P.O. Box 9429
San Jose, CA 95157
Reference: |
Your Purchase Order Number: 205-831-455, 205-AH921REV3, 205-XG015, 205AJ113
Foxboro Sales Order Number: 83N27384, 77N26313, 80N27721, 78N61787
Quantity:18
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. John R. Sampson
Vice President Indiana Michigan Group
Indiana Michigan Power Company
500 Circle Drive
Buchanan, Ml 49107
Reference: |
Your Purchase Order Number: 00777-821-8X, C-8741, C-8741 REPL
Foxboro Sales Order Number: 88N34665, 921712687, 921721688, 93F29761
Quantity:156
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. John F. Franz, Jr.
Vice President, Nuclear
IES Utilities, Inc.
200 First Street, SEL
P.O. Box 351
Cedar Rapids, IA 52406-0351
Reference: |
Your Purchase Order Number: S40596, S75317
Foxboro Sales Order Number: 88N42018, 93F07784
Quantity:4
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform You of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed Contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with t n plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Q.A. Department
Duane Arnold Energy Center
3277 DAEC Road
Palo, IA 52324
Reference: |
Your Purchase Order Number: S40596, S75317
Foxboro Sales Order Number: 88N42018, 93F07784
Quantity:4
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. John H. Swailes
Vice President Nuclear Energy-Cooper Nuclear Station
Nebraska Public Power District
P.O. Box 98
Brownville, NE 68321
Reference: |
Your Purchase Order Number: 186900, 189546
Foxboro Sales Order Number: 81N52062, 81N56488
Quantity: 3
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile+ 1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Supplier Q.A.
Nebraska Public Power District
P.O. Box 98
Brownville, NE 68321
Reference: |
Your Purchase Order Number: 186900, 189546
Foxboro Sales Order Number: 81N52062, 81N56488
Quantity:3
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Nevada Power Company
P.O. Box 230
Las Vegas, NV 89151
Reference: |
Your Purchase Order Number: RG4-108 Foxboro
Sales Order Number: 81N65372
Quantity: 5
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. James Knubel
Chief Nuclear Officer
Power Authority of the State of New York
123 Main Street
White Plains, NY 10601
Reference: |
Your Purchase Order Number: 89-1411,87-IP-3174, 88-IP-0053,
88-IP-0719, 89-IP-0005, S9000471, 86-3989 86-5284, 87-5795
Foxboro Sales Order Number: 89F03657, 87N46320, 87N59811,
88N36149, 88N49659, 90F34101, 86N51407, 88N36186
Quantity:20
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Technical Services Director J.A. Fitzpatrick Nuclear Power Plant
P.O. Box 41
Lycoming, NY 13093
Reference: |
Your Purchase Order Number: 89-14111, 87-5795
Foxboro Sales Order Number: 89F03657, 88N36186
Quantity:3
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Quality Services Supervisor
New York Power Authority
P.O. Box 215 Buchanan, NY 10511
Reference: |
Your Purchase Order Number: 87-IP-3174, 88-IP-0053,
88-IP-071989-IP-0005, S9000471, 86-3989 86-5284
Foxboro Sales Order Number: 87N46320, 87N59811, 88N36149,
88N49659, 90F34101, 86N51407
Quantity: 17
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Procurement Q.C. Engineer
New York Power Authority
Indian Point 3
P.O. Box 215
Buchanan, NY 10511
Reference: |
Your Purchase Order Number: 87-IP-3174, 88-IP-0053, 88-IP-071, 86-3989 86-5284
Foxboro Sales Order Number: 87N46320, 87N599811, 88N36149, 88N49659, 90F34101, 86N51407
Quantity:17
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Quality Assurance
New York Power Authority
P.O. BOX 215
Buchanan, NY 10511
Reference: |
Your Purchase Order Number: 87-IP-3174, 88-IP-0053, 88-IP-0719, 89-IP-0005, S9000471, 86-3989 86-5284
Foxboro Sales Order Number: 87N46320, 87N59811, 88N36149, 88N49659, 90F34101, 86N51407
Quantity: 17
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. John H. Mueller
Senior V.P. and Chief Nuclear Officer
Niagara Mohawk Power Corporation
2nd Floor Operations Building
P.O. Box 63
Lycoming, NY 13093
Reference: |
Your Purchase Order Number: see Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:79
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. M.D. Wadley
VP-Nuclear, Chief Nuclear Officer
Northern States Power Company
414 Nicollet Mall
Minneapolis, MN 55401
Reference: |
Your Purchase Order Number: 10040-J-300QAC, D25425MQ CHANGE 001, M005217
Foxboro Sales Order Number: 81N59715, 84N42554, 80N40432
Quantity:17
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Olin Corporation
2400 Buffalo Avenue
Niagara Falls, NY 14302
Reference: |
Your Purchase Order Number: NF-87728
Foxboro Sales Order Number: 81N45065
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. W. Gary Gates
Vice President for Nuclear Operations - Ft. Calhoun Station
Omaha Public Power District
P.O. Box 399, Hwy 75
North of Fort Calhoun
Fort Calhoun, NE 68023-0399
Reference: |
Your Purchase Order Number: 3565SUPPL#3, 53240, S011618, S016638, S022258
Foxboro Sales Order Number: 84N36017, 81N30237, 86N50528, 87N37033, 87N49735
Quantity:58
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
ATTN: Mgr. Nuclear Licensing & Industry Affairs
Omaha Public Power District
MS: FC-2-4 Adm. Bldg
Box 399, Highway 75
Fort Calhoun, NE 68023
Reference: |
Your Purchase Order Number: 3565SUPPL#3, 53240, S011618, S016638, S022258
Foxboro Sales Order Number: 84N36017, 81N30237, 86N50528, 87N37033, 87N49735
Quantity:58
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
ATTN: Director, Licensing
PECO Energy Company
965 Chesterbrook Blvd., 62A-1
Wayne, PA 19087-5691
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:57
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Supervisor, Q.A. Engineering
Public Service Company Of Colorado
16805 Weld City Road 19 1/2
Platteville, CO 80651
Reference: |
Your Purchase Order Number: N3249, N4672, N4802
Foxboro Sales Order Number: 81N34333, 83N41493, 83N44551
Quantity:8
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
ATTN: Manager, Corporate Nuclear Quality Division
PECO Energy Company
965 Chesterbrook Blvd., 63C-1
Wayne, PA 19087-5691
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:57
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Robert G. Byram
Senior V.P. -Generation and Chief Nuclear Officer
Pennsylvania Power and Light Company
2 North Ninth Street
Allentown, PA 18101
Reference: |
Your Purchase Order Number: 0-10655-1SUP#2, 2-17664-1
Foxboro Sales Order Number: 82N55213, 84N49990
Quantity:4
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. A. Clegg Crawford
Vice President Electric Production
Public Service Company of Colorado
P.O. Box 840
Denver, CO 80201-0840
Reference: |
Your Purchase Order Number: N3249, N4672, N4802
Foxboro Sales Order Number: 81N34333, 83N41493, 84N44551
Quantity:8
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
I/C PM Analyst
Rochester Gas and Electric Corporation
R.E. Ginna Nuclear Power Plant
1503 Lake Road
Ontario, NY 14519
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:31
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Operations Assessment
Rochester Gas and Electric Corporation
89 East Avenue
10th FLoor
Rochester, NY 14649
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:31
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Ms. Jan Schori
General Manager
Sacramento Municipal Utility District
6201 S. Street
P.O. Box 15830
Sacramento, CA 95813
Reference: |
Your Purchase Order Number: GR88696
Foxboro Sales Order Number: 86N55260
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Sierra Pacific Power Company
P.O. Box 249
Valmy, NV 89438
Reference: |
Your Purchase Order Number: 1556
Foxboro Sales Order Number: 81N55470
Quantity:21
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
ABB Electro-Mechanics
P.O. Box 750
New Britain, CT 06051
Reference: |
Your Purchase Order Number: 49851
Foxboro Sales Order Number: 85N38713
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
ABB Electro-Mechanics
P.O. Box 750
New Britain, CT 06051
Reference: |
Your Purchase Order Number: 49851
Foxboro Sales Order Number: 85N38713
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Argonnne National Laboratory
P.O. Box 2528
Idaho Falls, ID 83401
Reference: |
Your Purchase Order Number: 966-01
Foxboro Sales Order Number: 91F48299
Quantity:8
Model: N-2A0-L2C-R Contact output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Supervisor, D.D.C.
Arizona Public Service Company
P.O. Box 52034
Mail Station 6755
Phoenix, AZ 85072-2034
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:204
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14,1999
Mr. Dale R. Leech
Mail Station 7965
Arizona Public Service Company
Palo Verde Nuclear Generating Station
5801 S. Wintersburg Road
Tonopah, AZ 85354-7529
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:204
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Vice President, Operations
Entergy Operations Incorporated
Arkansas Nuclear One
1448 SR 333
Russellville, AR 78201
Reference: |
Your Purchase Order Number: 199380, 224711,41386, 41579, 48801, 12265SUPP No 1
Foxboro Sales Order Number: 84N52112,89N41503, 90F19458, 85N52599, 85N53047, 86N39216
Quantity:25
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Supervisor, Industry Events Analysis
Entergy Operations
Arkansas Nuclear One
Route 3, Box 137G
Russellville, AR 78201
Reference: |
Your Purchase Order Number: 12265 SUPP No 1, 199380, 224711, 41386, 41579, 48801
Foxboro Sales Order Number: 84N52112, 89N41503, 90F19458, 85N52599, 85N53047,86N39216
Quantity:25
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Supervisor, Engineering Databases
Entergy Operations
Arkansas Nuclear One
Route 3, Box 137G
Russellville, AR 72801
Reference: |
Your Purchase Order Number: 12265 SUPP No 1, 199380,224711, 41386, 41579, 48801
Foxboro Sales Order Number: 84N52112, 89N41503, 85N52599, 85N53047, 86N39216
Quantity:25
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Vice President - Nuclear Energy
Baltimore Gas and Electric Company
Calvert Cliffs Nuclear Plant
1650 Parkway
Lusby, MD 20657-4702
Reference: |
Your Purchase Order Number: 14100E, 33598-EX
Foxboro Sales Order Number: 82N36233, 83N37490
Quantity:6
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. G. Douglas Whittier
Vice President Engineering and Licensing
Maine Yankee Atomic Power Company
329 Bath Road
Brunswick, ME 04011
Reference: |
Your Purchase Order Number: 37106-00
Foxboro Sales Order Number: 84N37676
Quantity:3
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Vice President Nuclear and Pilgrim Director
Boston Edison Company
RFD #1, Rocky Hill Road
Plymouth, MA 02360
Reference: |
Your Purchase Order Number: 34118, 34118-A, STR122258-001
Foxboro Sales Order Number: 81N43715, 82N43811, 92F09337
Quantity:4
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Executive Vice President - Energy Supply and Chief Nuclear Officer
Carolina Power and Light Company P.O. Box 1551
Raleigh, NC 27602
Reference: |
Your Purchase Order Number: B-25314CO1, B-26534, B-29740
Foxboro Sales Order Number: 85N35924, 85N30542, 85N45247
Quantity:8
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Acting Director, Nuclear Licensing & EQA
Combustion Engineering Incorporated
1000 Prospect Hill Road
Windsor, CT 06095
Reference: |
Your Purchase Order Number: 9874824-D9420
Foxboro Sales Order Number: 88N42441
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Manager, Nuclear Regulatory Services
Commonwealth Edison Company
Executive Towers West III
140 Opus Place, Suite 900
Downers Grove, IL 60515
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:94
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Kenneth L. Graesser
Site Vice President
Commonwealth Edison Company
4450 N. German Church Road
Byron, IL 61010
Reference: |
Your Purchase Order Number: 238231, 269199, 269207
Foxboro Sales Order Number: 81N41224, 82N56864, 82N56857
Quantity:41
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Timothy J. Tulon
Site Vice President Commonwealth Edison Company
RR #1
P.O. Box 84
Braceville, IL 60407
Reference: |
Your Purchase Order Number: 4G5875, 238232, 269201, 269208
Foxboro Sales Order Number: 91F34138,81N41223 82N56875, 82N56858
Quantity:43
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. J.S. Perry
Site Vice President
Commonwealth Edison Company
Dresden Nuclear Power Station
6500 North Dresden Road
Morris, IL 60450-9765
Reference: |
Your Purchase Order Number: 30375, 303719, 303720, 303721, 303752, 303753
Foxboro Sales Order Number: 83N42614, 83N42622, 83N42621, 83N42609, 83N42615, 83N42165
Quantity:8
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
Mr. L. William Pearce
Site Vice President Quad Cities
Commonwealth Edison Company
Quad Cities Nuclear Power Station
22710-206th Avenue, North
Cordova, IL 61242
Reference: |
Your Purchase Order Number: 503006 REL XX60
Foxboro Sales Order Number: 93F16498
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. D.N. Morey
Vice President Farley Project
Southern Nuclear Operating Company, Inc.
P.O. Box 1295
Birmingham, AL 35201-1295
Reference: |
Your Purchase Order Number: 86510
Foxboro Sales Order Number: 89N47994
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. John K. Wood
Vice President, Nuclear - Davis-Besse
Toledo Edison Company
c/o Davis-Besse NPS
5501 N. State Route 2
Oak Harbor, OH 43449-9760
Reference: |
Your Purchase Order Number: C-601496-D90, Q012267, 046-Q-95926A-PN, 125-Q92388A-JA, Q009352ST, S-00240-D89,S-044515-D93
Foxboro Sales Order Number: 90F04692, 87N58993, 86N39928, 85N54492, 87N55474, 89N47605,93F04325
Quantity: 16
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Ted C. Feigenbaum
Executive Vice President and Chief Nuclear Officer
Northeast Utilities Service Company
c/o Mr. Terry L. Harpster
P.O. Box 128
Waterford, CT 06385
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:646
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Bruce D. Kennyon
Chief Nuclear Officer- Northeast Nuclear
Northeast Nuclear Energy Company Millstone Energy Company
P.O. Box 128
Waterford, CT 06385
Reference: |
Your Purchase Order Number: 647221, 571832, 884365 REPL, 774781
Foxboro Sales Order Number: 83N51103, 81N58350, 93F21197,87N49944
Quantity:324
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Station Technical Bulletins Coordinator
Connecticut Yankee Atomic Power Company
362 Injnun Hollow Road
East Hampton, CT 06424-3099
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:646
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mgr. of Nuclear Operations Services
Northeast Nuclear Energy Services
105 Seldon Street
Berlin, CT 06037
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:324
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Supervisor Procurement QA
Northeast Nuclear Energy Company
P.O. Box 270
Hartford, CT 06141-0270
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:324
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. John P. Stetz
Sr. Vice President - First Energy Nuclear Services
Centerior Energy Illuminating Company
76 Main Street
Akron, OH 44308
Reference: |
Your Purchase Order Number: C-601496-D90, Q012267, 046-Q-95926A-PN, 125-Q-92388A-JA, Q009352ST, S-00244-D89, S-044515-D93
Foxboro Sales Order Number: 90F04692, 87N58993, 86N39928, 85N54492, 87N55474, 89N47605,93F04325
Quantity:16
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Paul H. Kinkel
Vice President Nuclear Power
Consolidated Edison Company of New York
Broadway & Bleakley Avenue
Buchanan , NY 10511-1099
Reference: |
Your Purchase Order Number: 708668, 8696411
Foxboro Sales Order Number: 87N44544, 88N56893
Quantity:2
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
p>Mr. Robert A. Fenech
Sr. Vice President-Nuclear Fossil and Hydro Operations
Consumers Energy Company
212 W. Michigan Avenue
Jackson, MI 49201
Reference: |
Your Purchase Order Number: 0003-3649-CQ, 5006-5844-QA, 5009-0293-QA, 7220-J204AC, 7220-J-204-AC REV14, 9874824-9420 SUPPL 5
Foxboro Sales Order Number: 82N43112, 82N46764, 83N39766, 74N41545, 80N57780, 89N47024
Quantity: 181
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Vice President - Nuclear
Dairyland Power Cooperative
P.O. Box 817
La Crosse, WI 54601
Reference: |
Your Purchase Order Number: 0A8502673, A80406, 0A8503474
Foxboro Sales Order Number: 85N50217, 81N48223, 85N53601
Quantity:5
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Douglas R. Gipson
Sr. Vice President Nuclear Generation
Detroit Edison Company
6400 North Dixie Highway
Newport, MI 48166
Reference: |
Your Purchase Order Number: 1A-53418
Foxboro Sales Order Number: 84N37161, 81N35979
Quantity:8
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Supervisor Material Enqineerina
Detroit Edison - Fermi 2
ATTN: Engineering Tracking System (ETS)
6400 North Dixie Highway
Newport, MI 48166'
Reference: |
Your Purchase Order Number: 1A-53418
Foxboro Sales Order Number: 84N37161, 81N35979
Quantity:8
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. J.E. Cross
President - Generation Group and Chief Nuclear Officer
Duquesne Light Company
P.O. Box 4
Shippingport, PA 15077
Reference: |
Your Purchase Order Number: D036060
Foxboro Sales Order Number: 87N34830
Quantity:18
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Joseph J. Hagan
Vice President Operations, Grand Gulf
Entergy Operations, Inc. P.O. Box 756
Port Gibson, MS 39150
Reference: |
Your Purchase Order Number: 205-XG707, 9645-J-318.1, 9645-J-318.1 REV4, M70001
Foxboro Sales Order Number: 81N39760, 82N56478, 81N53379
Quantity:5
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. John R. McGaha, Jr.
Vice President
Entergy Operations, Inc.
P.O. Box 220
St. Francisville, LA 70775
Reference: |
Your Purchase Order Number: 205-AH928
Foxboro Sales Order Number: 80N49909
Quantity:4
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. T.F. Plunkett
President, Nuclear Division
Florida Power and Light Company
P.O. Box 14000
Juno Beach, FL 33408-0420
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:24
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
Manager of Quality Assurance Services
Florida Power & Light Company
P.O. Box 14000
Juno Beach, FL 33400-0420
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:24
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Site Purchasing Supervisor
Florida Power & Light Company
Turkey Point Nuclear Plant
P.O. Box 3088
Florida City, FL 33034
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:24
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Roy A. Anderson
Sr. Vice President, Energy Supply
Florida Power Corporation
P.O. Box 14042
St. Petersburg, FL 33733
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity: 173
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Manager of Nuclear I/C Engineering
Florida Power Corporation
P.O. Box 14042
St. Petersburg, FL 33733
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity: 173
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of.a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Michael B. Roche
Vice President and Nuclear Director
GPLI Nuclear Corp.
Oyster Creek Generating Station
P.O. Box 388
Forked River, NJ 08731
Reference: |
Your Purchase Order Number: 0420364, OP-026940, PP-035001, PP-058412, PP-066586, 71318DN
Foxboro Sales Order Number: 93F14995, 85N47998, 86N36864, 87N55890, 88N42654, 81N46871
Quantity:41
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Vendor Document Control Engineer
GPU Nuclear Corp.
Oyster Creek Nuclear Station, Trailer 300
P.O. Box 388
Forked River, NJ 08731
Reference: |
Your Purchase Order Number: 0420364, OP-026940, PP-035001, PP-058412, PP-066586, 71318DN
Foxboro Sales Order Number: 93F14995, 85N47998, 86N36864, 87N55890, 88N42654, 81N46871
Quantity:41
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. J.D. Woodward
Executive Vice President Nuclear Operations
Southern Nuclear Operating Company, Inc.
P.O. Box 1295
Birmingham, AL 35201
Reference: |
Your Purchase Order Number: G16024, PEHA-48 C.O.7,PCG2-5658, PAV-26028
Foxboro Sales Order Number: 81N58923, 82N42840,82N42839, 83N44967, 85N39445
Quantity:1
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. James W. Langenbach
Vice President and Director TMI
GPU Nuclear Corporation
P.O. Box 480
Middletown, PA 17057
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity: 123
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays,- no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Russell W. Krieger
Vice President - Nuclear Generation
Southern California Edison Company
P.O. Box 128
San Clemente, CA 92674
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:358
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Operating Experience Manager
Tessessee Valley Authority
1101 Market Street
BR 4X
Chattanooga, TN 37402
Reference: |
Your Purchase Order Number: See Attached Sheet
Foxboro Sales Order Number: See Attached Sheet
Quantity:278
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. D.F. Schnell
Sr. Vice President - Nuclear
Union Electric Company
P.O. Box 149
St. Louis, MO 63166
Reference: |
Your Purchase Order Number: 090660, 096775, 10466-J-110-2, 10466-J-110-2REV16, 10466-SPJ-110-2, 84730,93624
Foxboro Sales Order Number: 91F15951, 89F04103, 76N56503, 82N40657, 81N43335, 87N40318, 86N41913
Quantity:54
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. J.V. Bemis
Vice President, Nuclear Operations
Washington Public Power Supply System
MD PE20
P.O. Box 968
Richland, WA 99352
Reference: |
Your Purchase Order Number: 64396-N19733
Foxboro Sales Order Number: 79N57395
Quantity:76
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Michael B. Sellman
Chief Nuclear officer
Wisconsin Electric Power Company
231 W. Michigan Street
Milwaukee, WI 53201
Reference: |
Your Purchase Order Number: A65127-S, B29856-S, B-52578-P, P0136831 000
Foxboro Sales Order Number: 8ON62550, 83N39356, 84N36162, 89N34395
Quantity:72
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Clark Steinhardt
Sr. Vice President - Nuclear Power
Wisconsin Public Service Corporation
P.O. Box 19002
Green Bay, WI 54307-9002
Reference: |
Your Purchase Order Number: 02736, 08996, 119368, 54116
Foxboro Sales Order Number: 89N33914, 85N51376, 92F23100, 83N42310
Quantity:13
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Andrew Kadak
President
Yankee Atomic Electric Company
580 Main Street
Bolton, MA 01740-1398
Reference: |
Your Purchase Order Number: 103265, 103857
Foxboro Sales Order Number: 84N30755, 84N 41295
Quantity:10
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
FOXBORO
The Foxboro Company
Foxboro, MA 02035-2099
United States of America
Telephone +1 508 543 8750
Facsimile +1 508 549 6750
Internet http://iom.invensys.com/UK/Pages/Foxboro.aspx/
July 14, 1999
Mr. Otto L. Maynard
President and Chief Executive Officer
Wolf Creek Nuclear Operating Corporation
P.O. Box 411
Burlington, KS 66839
Reference: |
Your Purchase Order Number: 10466-J-110-1, 10466-J-110-1 (Q)
REV16, 10466-SPJ-1101, 519500
Foxboro Sales Order Number: 76N56505, 82N40656, 81N43334, 87N43104
Quantity:
Model: N-2A0-L2C-R Contact Output Isolator |
Dear Customer,
In compliance with 10CFR Part 21 this letter is to inform you of a potential failure with N-2A0-L2C-R Contact Output Isolator cards purchased from The Foxboro Company as referenced above. The subject Contact Isolator cards may contain N0152CK or C0147SS relays supplied by Potter & Brumfield which were manufactured utilizing pure tin plated contact support arms. As a result, in low voltage, low current applications, the growth of tin whiskers between adjacent metallic surfaces of the contact support arms can lead to the establishment of a resistive shunt path.
Analysis performed on two returned relays showed that they were in operation for 8 years (displaying date codes of 9110 & 9112) before a resistive shunt path developed across the Normally Open and/or the open Normally Closed contact. Further analysis performed by the supplier of.the relay confirmed the resistive shunt path was caused by the existence of tin whisker growth between the contact support arms. To date, this is the first confirmed instance of this failure mode on these relays.
The Foxboro Company has two sources of these relays qualified for use. However, this failure mode is limited to those relays supplied by Potter & Brumfield which were manufactured between 1977 and 1993 with tin plated contact support arms. The Foxboro Company presently has another source, Communications Instruments Inc (formerly SIGMA) qualified for use. Due to the different construction techniques utilized on the CII relays, no concern of tin whisker growth exists on those relays.
SIEBE
A Siebe Group Company
*** END OF DOCUMENT ***
Page Last Reviewed/Updated Tuesday, March 09, 2021